Coded used amplifier

[Levoff]

Hi i need help i try coded a used amplifier to my vehicule F07
I do this with e-sys
Connect => Read FA (VO) => Activate FA (VO) => Read VCM => Left-Click on AMP => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown (bottom) => Select OK => Right-Click on AMP (the ECU itself not the underlying CAFD) => Select CODE

But i got this error

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
ExecutionID=2024/04/21-13:28:30.939
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
MCDDiagService<id=46634, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: negative response : conditionsNotCorrect, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
MCDDiagService<id=46900, job=com.bmw.psdz.jobs.uds.MCD3_GetSVKfromECU, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: timeout, link=AMP_TOPHB_37_ETHERNET> [DIAGSERVICE]
[AMP_TOPHB - 37] There was an error during TAL execution, please check the log files. [WARN]
[AMP_TOPHB - 37] - [Exception - AMP_TOPHB - 37] negative response error:
 code: TIMEOUT P2/T2 occurred
 description: P2 timeout on Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2142][VendorCodeDescription=P2 timeout occured]; LinkName: AMP_TOPHB_37_ETHERNET
 severity: ERROR

[] null [THROWABLE]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "15s". [C206]

Read SVT after TAL execution started.
MCDDiagService<id=46600, job=com.bmw.psdz.jobs.common.MCD3_GenerateConfigFromVehicle, service=RDBI_SVK, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=46634, job=com.bmw.psdz.jobs.common.MCD3_GenerateConfigFromVehicle, service=RDBI_SVK - ReadDataByIdentifier SVK, description=error: negative response : conditionsNotCorrect, link=AMPT_37_ETHERNET> [DIAGSERVICE]
Read SVT after TAL execution finished.
Abarbeitung beendet

[TheNine90]

use read ECU not READ VCM.
make sure the actual unit is responding before coding it

[Levoff]

use read ECU not READ VCM.
make sure the actual unit is responding before coding it

Dont see amp in ecu only in vcm

[TheNine90]

then its not connected properly or unit is dead.
check wiring and voltages

[Levoff]

then its not connected properly or unit is dead.
check wiring and voltages

Connected properly and good voltage.  But if dead why in ista i see amp not coded for vehicule ?

[Memedalji_]

when you connect via esys do you activate VO and then click on read ecu ?
If yes then check if you get there on SVT left AMP ECU or not, if yes then mark it, click on the right side detect caf for swe and choose the last bottom one and hit code.

If you dont get AMP then make sure your Target is correctly for the car you have there, otherwise like there was said there is no power

[Levoff]

when you connect via esys do you activate VO and then click on read ecu ?
If yes then check if you get there on SVT left AMP ECU or not, if yes then mark it, click on the right side detect caf for swe and choose the last bottom one and hit code.

If you dont get AMP then make sure your Target is correctly for the car you have there, otherwise like there was said there is no power

if my amp are bricked that will do this?
In vcm when i do read code not see vin# but i see ÿÿÿÿÿÿÿ

[Memedalji_]

when you connect via esys do you activate VO and then click on read ecu ?
If yes then check if you get there on SVT left AMP ECU or not, if yes then mark it, click on the right side detect caf for swe and choose the last bottom one and hit code.

If you dont get AMP then make sure your Target is correctly for the car you have there, otherwise like there was said there is no power

if my amp are bricked that will do this?
In vcm when i do read code not see vin# but i see ÿÿÿÿÿÿÿ

Can you post here a picture how the svt tree looks like in esys when you hit read ecu

[TheNine90]

then its not connected properly or unit is dead.
check wiring and voltages

Connected properly and good voltage.  But if dead why in ista i see amp not coded for vehicule ?

Might be you are selecting the wrong module. confirm the name in ista and esys

[Levoff]

then its not connected properly or unit is dead.
check wiring and voltages

Connected properly and good voltage.  But if dead why in ista i see amp not coded for vehicule ?

Might be you are selecting the wrong module. confirm the name in ista and esys

With my old amp(f07) i have no sound and in ista i have b7f4e1 amp undervoltage i check fuse and power on amp and i have 14v so i assume my amp is defective. Now i buy used amp from f10 .amp have same model# and part#. i plug it and when i check with ista code its amp not coded for vehicule. And still no sound.  Today i plug my old amp and when i do read ecu i see amp and when i do read vcm and read code on amp i see my car vin# but when i plug new amp not see in read ecu only in vcm and when i do read code vin# are ÿÿÿÿÿÿÿ