+- Bimmer Scene - Latest BMW Coding / Retrofits / Maps (https://www.bimmerscene.com)
+-- Forum: Bimmer Scene Meet (https://www.bimmerscene.com/forumdisplay.php?fid=5)
+--- Forum: Request Section (https://www.bimmerscene.com/forumdisplay.php?fid=22)
+--- Thread: firmware icom next (oem) (/showthread.php?tid=6481)
firmware icom next (oem) - at0ny - 05-22-2024
Hello,
I am running on ista 4.32.15 standalone version with iICOM-Next-04-23-10 firmware.
Can someone send firmware that works with ista 4.32.15? After this firmware update itoolradar show sometimes icom but not always..
Stil need to use enet cable due to this problem.
I have orginial icom next bought at bwm dealer, no clone!
RE: firmware icom next (oem) - TheNine90 - 05-23-2024
The firmware you have should work for you.
RE: firmware icom next (oem) - at0ny - 06-06-2024
(05-23-2024, 06:46 AM)TheNine90 Wrote: The firmware you have should work for you.yes but why is itoolrader not showing icom anymore? And also why dont ista show it anymore? Before firmware update it was shown in ista 4.32.15.. Thats strainge.
manual firmware update done all the steps, also it rebooted. But sometimes it show in itoolrader, but most of the time not... Before firmware update ista showed it also as state: firmware. Thats why i did the update but with no succes..
Gr.
RE: firmware icom next (oem) - TheNine90 - 06-07-2024
If it doesnt show up in the PC then issue might be with the ICOM
RE: firmware icom next (oem) - at0ny - 06-25-2024
(06-07-2024, 06:37 AM)TheNine90 Wrote: If it doesnt show up in the PC then issue might be with the ICOM
Thats strange right? When i received it, out of the box complete new tool from dealer. Its worked but showed status firmware. Only after the firmware update this problem..
Think i wil give a visit to dealerworkshop and ask if they can check for me if can find something wats wrong.
I also read you could to firmware update with usb port? To force a firmware update if i could not make connection, dont know if this is also a option.
Now stil use ista with enet cable, and i have a €557,- tool i cant use at the moment..
RE: firmware icom next (oem) - TheNine90 - 06-25-2024
There is a way to factory reset it and recover it if its crashed using the USB